Nanhong Dingyu is a custom furniture factory in Foshan, Guangdong — the cluster that supplies most contract furniture going into hotels, clubs and high-end residential projects across the Gulf and Southeast Asia. We have been building fitted furniture for fifteen years, and today most of our output is project work: guest room casegoods, wardrobes, wall panelling, kitchen and vanity cabinetry, all produced against a client’s drawings rather than a catalogue.
If you are a contractor, procurement office, interior design studio or owner’s representative sourcing for a specific project, this page explains what we can take on, what we specify, and what we need from you before we can quote.
Guest room casegoods — nightstands, headboards, wardrobes, luggage benches, minibar cabinets — plus lobby joinery, corridor wall panelling and bathroom vanities. We work to shop drawings and finish schedules issued by the project’s design team, and we produce sample rooms before bulk release so the finish is approved against a physical piece rather than a rendering.
Full-house fitted furniture for large flats and villas: wardrobes, walk-in closets, kitchen cabinetry, TV and display walls, study units, stair and corridor panelling, and concealed storage. Every run is measured on site or against architect’s dimensions, then produced as one batch so that colour and grain stay consistent across rooms.
Cabinet and panel work for clubs, sales centres, clinics, serviced apartments and hospitality back-of-house. This is usually more about durability and cleanability than about decorative detail, so the specification tends to run toward high-pressure laminate, compact board and stainless rather than veneer.
Where a project needs both, we can supply fixed joinery together with matching loose pieces — dining tables, coffee tables, desk units, upholstered banquettes — so the timber colour and finish match across the whole room instead of arriving from two different suppliers.
The board inside a cabinet decides how it behaves in a humid hotel bathroom, how long it lasts under daily use, and how much formaldehyde it releases into a guest room. We work with three families of substrate and specify according to the environment, not according to price alone.
Surfaces are matched to the project: sintered stone and quartz for worktops and vanity tops, HPL and melamine for contract-grade cabinet faces, veneer and lacquer where the design calls for a natural finish, and rattan or woven inserts where a scheme needs texture.
Hardware is Blum, DTC or Hafele depending on the budget line, with soft-close runners and hinges as standard rather than as an upgrade.
Every project follows the same sequence. A more detailed walkthrough sits on our process page.
Gulf projects usually require SASO conformity and a SABER certificate before goods clear. We can supply the technical file material your certificate body needs — board specifications, formaldehyde test reports, hardware certificates, material declarations — and we will tell you honestly which items we can document in-house and which need a third-party lab.
For other markets, we work with whatever conformity route the importer specifies. If your project has a documentation requirement we have not handled before, raise it at quotation stage rather than after production.
Three checks, not one at the end:
If your contract requires third-party inspection — SGS, Bureau Veritas, Intertek or your own QC team — we arrange access and hold the shipment until the report is issued.
A quotation is only meaningful if it is priced against the same scope as everyone else’s. Send us:
Send them through the contact page or straight to WhatsApp. We normally return a line-by-line quotation within 48 hours of receiving a complete package.
There is no single MOQ — it depends on the item. A full guest room set, a complete wardrobe run or a whole-house package is straightforward at any reasonable quantity. A single bespoke piece usually is not worth the tooling and freight, so we will tell you when a project is too small rather than quote it badly.
Typically 30 to 45 days from approved sample and confirmed deposit, depending on scope and finish. Panel-only work runs faster than lacquered or veneered work, and anything requiring imported hardware or stone adds lead time.
Yes. Most of our project clients send someone, or appoint an inspection agency, before the first bulk order. We will arrange the schedule and have the relevant sample pieces on the table when you arrive.
Crated in plywood cases with foam separation between finished faces, labelled by room and item number so the site team can unpack in sequence. Flat-packed where the design allows it, assembled where it does not.
No. We manufacture and deliver to the port; installation is handled by the project’s own fit-out team, which is normal for contract work. We supply installation drawings and will answer questions from the site team during fit-out.
Deposit on order confirmation, balance against the pre-shipment inspection report and before release of the original documents. Exact terms are set per project.
If you have drawings and a scope, the fastest route is to send them now and get a real number back rather than an indicative range. See the contact page for email, WhatsApp and the quotation form, or browse the guides library if you want to understand the sourcing process before you commit.